Olympus CKX-RFA Інструкція з експлуатації - Сторінка 25
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Лабораторне обладнання Olympus CKX-RFA. Olympus CKX-RFA 36 сторінок. Reflected fluorescence system
Друкувати сторінку
- 1. Table of Contents
- 1. General Precautions for Observation
- 1. Using the Controls
- 2. Important
- 2. Applicable Fluorescence Objectives
- 3. Nomenclature
- 3. Centering the Mercury Burner
- 4. Controls of each Module
- 4. Switching the Filter Slider
- 4. Troubleshooting Guide
- 4. Specifications
- 4. Assembly
- 4. Assembly
- 4. U-Excitation Filter Set Ckx-Nu (Optional)
- 5. Summary of Reflected Fluorescence Observation Procedure
- 5. Proper Selection of the Power Supply Cord
7-2 Detailed Assembly Procedure
2
3
Fig. 10
1
2
Fig. 11
3
4
Fig. 12
1
Removing the Dummy Cover
1. Rotate the coarse adjustment knob 1 in the direction of the
arrow to raise the revolving nosepiece to the upper limit.
2. Hook you finger into the pulling hole 3 on the cover 2 and
remove the cover.
1
Removing the Dust Cover and
2
Fluorescent Mirror Slider
1. Using the Allen wrench provided with the illuminator, loosen
2
the clamping knob 2 of the dust cover 1 and remove it.
2. Using the Allen wrench provided with the illuminator, loosen
the stopper screw 4 of the fluorescent mirror slider 3 at the
extremity of the CKX-RFA illuminator and remove the screw
and washer.
3. Pull the fluorescent mirror slider 3 in the direction of the
arrow to remove it.
REFLECTED FLUORESCENCE SYSTEM
FOR CKX41
(Fig. 10)
(Figs. 11 & 12)
22