Alpha-InnoTec SWC - Series Посібник з експлуатації - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Тепловий насос Alpha-InnoTec SWC - Series. Alpha-InnoTec SWC - Series 20 сторінок. Brine/water heat pumps
Друкувати сторінку
12.
more easily: place boards"(4) under it, e.g. from
13.
14. Slowly and carefully pull out the module box by
the carrying lugs"(2). Ensure that none of the
pipes are damaged
1
1.
15. Pull out the module box completely and place it
on the boards.
Subject to change without notice | 83056700dUK – Translation into English of the original German operating manual | ait-deutschland GmbH
2
3
2.
4
6.2 Installing the module box
1.
Place the module box carefully in the bottom of
the housing and slowly and carefully push it in.
–
– Lift up pipes so that they do not get damaged.
2.
Attach the two side retaining screws.
3.
Connect the hydraulic connections. At the
same time, replace O-rings on the heat pump
connections (
4.
Perform pressure test and insulate pipes with
the enclosed insulation hoses (
5.
Connect the electrical cables:
– Plug both connectors into the electrical
control cabinet. Ensure that the connectors
move easily and the lugs latch into position.
–
top of the module box.
separate
15