AccuLux UniLux 5 LED Інструкція із застосування - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція із застосування для Прожектор AccuLux UniLux 5 LED. AccuLux UniLux 5 LED 4 сторінки. Led-searchlight
Друкувати сторінку
Device Description
A
Setting collar
-
B
ON – OFF switch
-
Battery-charge indicator
C -
D
Strap fixing
-
E
Fixing clips
-
F
Wall fixing
-
G
Wall plug transformer
-
H – Vehicle on-board charger
Technical specifications
Casing material
Bulb
Operating time
Range
Battery
Charging time
Charge voltage
Weight
Dimensions in mm
Fitting the wall fixing "F"
Drill two holes in the wall, 110 mm apart verti-
cally. Ensure that the wall fixing is fitted close to a
plug socket. Take care not to damage the mains
supply cable when drilling the holes in the wall.
Now use two screws to fasten the wall fixing to
the wall.
Charging
Charge the torch for at least 14 hours before
using for the first time. It is charged in the wall
fixing "F" with the aid of the wall plug trans-
former "G resp. H". The torch is designed for
continuous charging and is protected against
overcharging. We recommend returning the
torch to the wall fixing when not in use to en-
sure a fully-charged torch is available for use at all
times. It is not possible to use the torch while it is
being charged. The charge process is indicated
by the red LED indicator "C".
Use
Plastics (impact resistant)
LED 3 Watt
approx. 190 min
approx. 1000 m
NiMH 4.8V/2 Ah
21 h
100-230 V AC 50/60 Hz;
12/24 V DC
440 g
256x93x93
To use, remove the torch from the wall fixing "F".
To switch it on, push the switch "B" forward. The
operating time of the torch is ca. 190 min (see
technical specification).
Important information
Only connect the wall plug transformer "G" to an
indoor 120/230 Volt alternating current supply.
Do not expose the torch to wet weather and
extreme temperatures. Always use a damp cloth
to clean the torch.
Disposal information
Do not throw dead nickel cadmium cells or
defective torches in the domestic waste. To
remove the battery, undo the fixing hook of the
cover on the underside of the torch by turning in
the direction of the arrow using a screwdriver
and remove the cover. Remove the battery and
dispose of in asuitable place (battery collection
point).
Warranty for defects
We provide a 24 month warranty for defects for
materials and workmanship. Wear parts such
batteries are not covered by the warranty. No
warranty
provided
from incorrect use.
Description de l'appareil
A
Anneau de réglage
-
B
Interrupteur marche/arrêt
-
Lampe contrôle de chargement
C -
D
Fixation courroie
-
E
Languettes de support
-
F
Fixation murale
-
G
Transformateur d'alimentation
-
H – Chargeur d'accumulateur pour voiture
Données techniques
Matériau de coque
Agent lumineux
Durée de luminosité
Etendue de
luminosité
Batteries
Durée de
chargement
Charge voltage
for
defects
resulting
Matière plastique
(résistante aux chocs)
LED 3 Watt
environ 190 min
environ 1000 m
NiMH 4.8V/2 Ah
21 h
100-230 V AC 50/60 Hz ou