Diesse VES MATIC Original Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Аналітичні інструменти Diesse VES MATIC Original. Diesse VES MATIC Original 3 сторінки.

Друкувати сторінку

– Quick Start Guide –

ALWAYS REFER TO THE USER MANUAL FOR ALL THE DETAILS ON THE

ANALYSIS CYCLE EXECUTION

Turn on the instrument

Press the START button

Open the top lid

Insert the test tubes until they are fully flush, orienting them

with the label facing the mark on the plate

Close the top lid

Press the button corresponding

mode you want to start

Automatic reading of the barcodes and indication on the display of

the number of samples present

Automatic mixing of the samples

Blood level reading at time 0'

Sedimentation

Blood level reading after 30 minutes (1H) or after 60 minutes (2H), with any

intermediate readings for sedimentation kinetics (1H KYN or 2H KYN)

ANALYSIS CYCLE EXECUTION – RANDOM ACCESS

During a cycle it will be possible at any time (excluding the cycle modes in kinetics

and the mixing phase) to insert a new sample

Mix the sample thoroughly before inserting it into the instrument (at least 8 times per

complete inversion)

Press the ADD button

Wait for the indication authorizing the opening of the top lid

Open the top lid and insert the test tube (as described above) in the position

indicated in the warning window that appears on the screen

Close the top lid

Automatic reading of the barcode of the added sample

Blood level reading at time 0'

Sedimentation

Blood level reading after 30 minutes (1H) or after 60 minutes (2H)

RESULTS

At the end of the analysis, the instrument displays the result for each sample in mm/h:

It will be green for ESR within the normal range

It will be red for ESR outside the normal range (which can be defined in the settings

menu under "THRESHOLD VALUE")

At the end of the analysis, the results are printed automatically (default ON)