Axminster ujk 106843 Посібник - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник для Інструменти Axminster ujk 106843. Axminster ujk 106843 20 сторінок. Universal dovetail jig

GROOVE / HOUSING JOINTS

• Max timber width - 290mm

• Min timber thickness - 10mm

• Max timber thickness - 25mm

Parts needed -

• Template B (sliding / half blind)

• Any straight cutter up to 14.5mm in diameter

• ¾" (19mm) Guide bush

Slot boards are cut horizontally

Groove Slot

1) Attach comb B with the long groove slot at the front

of the jig, see fig 01, move both side stops to a central

position & lock in place, see fig 02.

Fig 01-02

Side Stop

Fig 03-04-05

Square Line

2) Mark a square line across the board where the centre

of the groove slot will be, load in & clamp the board

horizontally under the comb & up against the left hand

side stop, see fig 03-04-05.

3) Ensure that the comb is sat flat & level on top of the

board, see fig 06. Use the wider part of the set gauge

to ensure that the marked square line is central to the

comb slot, see fig 07-08. Use the comb adjuster knobs to

align & adjust, see fig 09.

Fig 06-07-08