Axminster AHBGDL Hobby Series Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для М'ясорубка Axminster AHBGDL Hobby Series. Axminster AHBGDL Hobby Series 16 сторінок. Wide stone grinder

Друкувати сторінку

Changing a Grinding Wheel

Fig 10

Check that the spark guards and the tool rests are not touching the grindstone. Reconnect the

grinder to the mains supply, give the grinder a 'short burst', by switching it on and off quickly.

Check the grinder is not subject to any undue vibration. If the grinder does vibrate, strip it down

again and check that the bush (if fitted) is correctly positioned and is the correct size for the

stone and the spindle. Check the bore of the stone is correct. If these all seem correct, refit and

carryout the 'quick burst' procedure again. If the machine is still vibrating, discard the stone and

replace with another one. Run up to speed normally.

Leave the machine running for at least one minute before carrying out any work. Apply a

workpiece and check that the spark guard is correctly positioned and that the tool rest is securely

fixed.

If necessary dress the new stone lightly to ensure a 'good face' and good concentricity.