Axminster Trade DS12DLMB Посібник із швидкого старту - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Шліфувальна машина Axminster Trade DS12DLMB. Axminster Trade DS12DLMB 17 сторінок. 300mm disc sanders
Друкувати сторінкуStep 6 Check the pointer is set to ZERO on the tables scale
and adjust until correct (see fig 6).
Fig 06
WARNING! KEEP TOOLS AND
EQUIPMENT OUT OF THE REACH
OF YOUNG CHILDREN!
CLEAR ALL TOOLS AWAY FROM
SANDING AREA!
WARNING! WEAR A DUST MASK!
CONNECT THE SANDER TO THE
MAINS AND SWITCH ON.
Don't press too heavily against the sanding surface, all this
will do is slow the sander down. Remember, sanders work
by removing small particles of material quickly and heavy
pressure works adversely to the cutting process, further, it
will accelerate the rate of 'clogging' of the abrasive surfaces,
rendering the machine less efficient.
Pointer
Scale
WARNING! WEAR EYE
AND EAR PROTECTION!
Securing the Sander
It is recommended to secure the sander to a work bench or
stand using the four pre-drilled holes (d) in the chassis, (see
fig 07).
d
Operating Instructions
Sanding Configurations
Disc Sanding
Bevel Sanding
9
Setup/Adjustments
Fig 07
Fig 08
Fig 09