AlphaESS SMILE-G3-EVCT11 Посібник з монтажу, експлуатації та технічного обслуговування - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу, експлуатації та технічного обслуговування для Зарядний пристрій AlphaESS SMILE-G3-EVCT11. AlphaESS SMILE-G3-EVCT11 14 сторінок.

Друкувати сторінку

INTRODUCTION

Introduction

1.1 Safety and Warning

1）Keep explosive or ﬂammable materials, chemicals, vapors, and other hazardous

objects away from the charger.

2）Keep the charging socket clean and dry. If it is dirty, please wipe it with a clean and

dry cloth. Touching the socket core when the power is on is strictly forbid-den.

3）Do not use the charger if the device has defects, cracks, abrasions, bare leakage, or

any similar issues. Please contact the working staﬀ if any of these conditions occur.

4）Do not attempt to disassemble, repair, or modify the charger. If necessary, please

contact the working staﬀ. The improper operation could result in device damage, electric

leakage, etc.

5）If any abnormal condition happens, please press the emergency stop button

immediately and cut oﬀ all input and output power supply.

6）Please charge cautiously in rainy or lightning weather.

7）Keep the charger away from children to avoid injury.

8）Driving an EV during charging is strictly forbidden. Charge the EV only when it is

stationary. Charge hybrid electric vehicles only when the engine is switched oﬀ.

Warning

The input and output voltages of this device are dangerously high and

can pose a threat to human life. Please strictly observe all warn-ings and

operating instructions on the device and in the manual. Un-authorized

and non-professional service personnel should not re-move the cover of

this device.

1.2 Scope of Delivery

Check the scope of delivery and inspect components to ensure they are present and

undamaged. Contact your distributor if the packed components are incomplete or

EV Charger

(x1)

Wall bracket

(x1)

AC Connector

(x1)

1.3 Liability Limitation

AlphaESS will not assume any direct or indirect liability for any product damage or

property loss caused by the following conditions:

• Product modiﬁcation, design changes, or parts replacement without AlphaESS's

authorization;

• Changes or attempted repairs, and erasing of series number or seals by unauthorized

technicians;

• The product wiring and installation are not in compliance with standards and

regulations;

• Failure to comply with the local safety regulations;

• Transport damage (including painting scratch caused by rubbing inside packaging during

shipping). A claim should be made directly to the shipping or insurance company as

as the container/packaging is unloaded and such damage is identiﬁed;

• Failure to follow any/all of the user manual, installation guide, and maintenance

regulations;

• Improper use or misuse of the device;

• Insuﬃcient ventilation of the device;

• The product maintenance procedures have not been in compliance with an acceptable

standard;

• Force majeure (violent or stormy weather, lightning, overvoltage, ﬁre, etc.);

SMILE-G3-EVCT11

Installation, operation

& Maintenance Manual

(x1)

Wrench

(x1)

Terminal Resistor

(x2)

INTRODUCTION

M6*40 Screw

(x4)

Terminal block

(x5)

RFID Card

(x2)