AXMINSTER WORKSHOP 107695 Оригінальна інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Скруббер AXMINSTER WORKSHOP 107695. AXMINSTER WORKSHOP 107695 17 сторінок. 1hp extractor

Друкувати сторінку

GENERAL INSTRUCTIONS FOR 230V MACHINES

The following will enable you to observe good

working practices, keep yourself and fellow workers

safe and maintain your tools and equipment in good

working order.

WARNING!! KEEP TOOLS AND

EQUIPMENT OUT OF REACH OF

YOUNG CHILDREN.

KEEP WORK AREA AS

UNCLUTTERED AS IS PRACTICAL.

UNDER NO CIRCUMSTANCES

SHOULD CHILDREN BE ALLOWED

IN WORK AREAS.

Mains Powered Tools

• Tools are supplied with an attached 13 Amp plug.

• Inspect the cable and plug to ensure that neither

are damaged. Repair if necessary by a suitably

qualified person.

• Do not use when or where it is liable to get wet.

Workplace

• Do not use 230V a.c. powered tools anywhere

within a site area that is flooded.

• Keep machine clean.

• Leave machine unplugged until work is about to

commence.

• Always disconnect by pulling on the plug body

and not the cable.

•

Carry out a final check e.g. check the cutting tool

is securely tightened in the machine and the

correct speed and function set.

•

Ensure you are comfortable before you start work,

balanced, not reaching etc.

• Wear appropriate safety clothing, goggles, gloves,

masks etc. Wear ear defenders at all times.

• If you have long hair wear a hair net or helmet to

prevent it being caught up in the rotating parts of

the machine.

• Consideration should be given to the removal

of rings and wristwatches.

• Consideration should also be given to non-slip

footwear etc.

• If another person is to use the machine, ensure they

are suitably qualified to use it.

• Do not use the machine if you are tired or distracted.

• Do not use this machine within the designated

safety areas of flammable liquid stores or in areas

where there may be volatile gases.

• Check cutters are correct type and size, are

undamaged and are kept clean and sharp. This will

maintain their operating performance and lessen

the loading on the machine.

• OBSERVE.... make sure you know what is

happening around you and USE YOUR COMMON

SENSE.