AXMINSTER WORKSHOP 107695 Оригінальна інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Скруббер AXMINSTER WORKSHOP 107695. AXMINSTER WORKSHOP 107695 17 сторінок. 1hp extractor
Друкувати сторінкуASSEMBLY
Step 7
D
• Introduce the inlet duct (D) over the inlet fan
housing. Line up the holes and replace the Phillips
screws to secure it in position.
Step 8
• Locate one dust bag (B) and the large clip (E).
• Open up the dust bag and introduce the large
clip (E) over the bag's opening. Insert the dust bag
(B) over the outlet duct (C) tighten the large clip to
secure the dust bag in position. Clear all tools away.
B
Open the switch shroud on the extractor and
press the 'GREEN' button to switch on. Check that
E
everything is working correctly then switch off the
extractor by pressing the 'RED' button. Disconnect
the machine from the mains supply.
8
E
WARNING! KEEP TOOLS AND
EQUIPMENT OUT OF THE REACH
OF YOUNG CHILDREN.
CONNECT THE EXTRACTOR TO
MAINS SUPPLY.
Step 9
B