ABB UniSec Посібник з експлуатації та технічного обслуговування - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Промислове обладнання ABB UniSec. ABB UniSec 16 сторінок.
Друкувати сторінку
2
U N I S E C D I G I TA L M A N U A L E D I F U N Z I O N A M E N TO E M A N U T E N Z I O N E
—
Safety
Warnings provided in the interest of
safety
• Strictly comply with the instructions provided in
this manual.
• The apparatus must only be installed indoors, in
conditions suitable for electrical equipment.
• Make sure that the installation, use and
maintenance operations are performed by
qualified personnel only.
• Fully comply with the applicable rules of law
(IEC or local), the connection conditions required
by the local utility companies and the pertinent
occupational safety provisions.
• All work on the apparatus must be performed in
accordance with the corresponding instructions in
the manual.
• Consult the relevant manual for instructions on
how to use the circuit-breaker.
• Consult the relevant manual for instructions on
how to use the concentrator.
Qualified personnel
All installation, commissioning, operation and
maintenance work must be performed by qualified
personnel with adequate knowledge of the
apparatus.
During maintenance work, strictly comply with the
regulations in force in the country in which the
apparatus is installed.
Maintenance operations must be performed to the
highest standards of workmanship by trained
personnel who are fully familiar with the
characteristics of the apparatus, in compliance with
all the pertinent IEC safety regulations, the
regulations provided for by other technical bodies
and further instructions of primary importance. You
are strongly advised to engage the services of ABB
assistance personnel for maintenance and repair
work.
Information of crucial importance
Pay particular attention to information in the
manual highlighted by the following symbol:
This symbol is followed by four different indications
signalling the sort of injuries or damage which could
occur due to failure to comply with the instructions,
including those concerning safety precautions
• DANGER - highlights the more serious and
immediate risks able to cause severe personal
injuries and death
• WARNING - indicates risks or unsafe actions
which could cause severe personal injuries or
death.
• CAUTION - indicates risks or unsafe actions
which could cause less severe personal injuries or
material damage
• NOTE - highlights important procedures or
requirements which, in the case of non
compliance, could result in material damage
WARNING
Make sure that the specified electrical data are not
exceeded in the conditions is which the apparatus
is used. Keep the manuals in an accessible place
where they can be consulted by all the personnel
involved in the apparatus installation, use and
maintenance operations. The utility provider's
personnel are responsible for all issues concerning
occupational safety and correct use of the
apparatus
WARNING
Always comply with the instructions in the manual
and the regulations governing good engineering
practice (GEP)! Dangerous voltages can cause
severe injuries or death. Disconnect the supply
source, then earth all live parts before performing
any work on the apparatus.
Comply with the safety regulations in force in the
place of installation
NOTE
This manual is an addition to the operation
and maintenance manual for UniSec panels
1VFM200005
Contacts
Please contact our area assistance center for any
queries concerning this manual.
Consult the back cover of this manual for details
about the contact people.