Alphamount APSS12B Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Стелажі та підставки Alphamount APSS12B. Alphamount APSS12B 11 сторінок. Monitor desk mount
Друкувати сторінку
4. Attach Monitors to the Arm
4-1 Choose Proper Bolts
Flat back monitor
Curved back monitor
75 mm ≈ 3 in.
100 mm ≈ 4 in.
5. Adjust Gas Spring Tension
Be sure to keep the arm in
horizontal position during
adjustment. Or else, it would
be difficult to adjust the
mount or damage the mount.
4-2 Install Monitors to the Arms
1
A
B-2
B-1
1. If the monitor can stay at the desired height
by itself, no adjustment needed.
2. If the monitor rises up, press the arm to keep
it in horizontal position and then use the Large
Allen Key (E) to turn the bolt
clockwise("-" direction) to reduce tension of
the arm only until the monitor can stay at the
desired height by itself.
3. If the monitor falls down, lift the arm to keep
it in horizontal position and then use the Large
Allen Key (E) to turn the bolt
counter-clockwise("+" direction) to increase
tension of the arm only until the monitor can
stay at the desired height by itself.
08
0.1-0.2in.(3-5mm) spacing left
Phillips
Screwdriver
[Not Included]
The tension is preset at
8.8-11 LBS(4-5kg). After
hanging the monitor to
the mount, please release
the monitor slowly to
prevent it from falling
suddenly.