Alphard Golf USA eWheels Club Booster Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Фітнес-обладнання Alphard Golf USA eWheels Club Booster. Alphard Golf USA eWheels Club Booster 18 сторінок.
Друкувати сторінку
- 1. Table of Contents
- 2. Installing the Axle Clamp [Brackets]
- 3. Adjusting the Wheelbase
- 4. Charging the Battery
- 5. Setting up before the Round
- 6. Severe Inclines
- 7. Controller: First Time Use
- 8. Controller: Speed Control
- 9. Controller: Steering
- 10. Controller: Distance Timer
- 11. Controller: Cruise Control
- 12. Controller: Electronic Brake Release
- 13. Controller: Pairing Your Remote with Club Booster
- 14. Warranty Information
- 15. Alphard Golf USA Contact Information
Installing the Axle Clamp [Brackets]
The Axle Clamps are specific to a cart brand and model(s). Please be sure the brand and model(s) listed
on the box matches the brand and model of your cart. If they do not match, contact your retailer to
exchange to the correct brand and model.
Tools Needed
•
Philips Screwdriver,
•
Open-end, Adjustable, or Socket Wrench for: Wheel Nut, Strut Pivot Nut and Bracket Nut
Installing the Axle Clamps
Step 1
Remove the Rear Wheels. If your push cart has a rear wheel
braking mechanism, you will need remove it first.
Step 2
Remove the Wheel Pivots on both sides.
Step 3
Slide the Axle Clamp (Left or Right) onto its corresponding
Strut Tube (opening of Axle Clamp should be facing away
from cart) and align the holes and fasten them with the Bolt
and Nut with Washer.
7