AccuPel HDG-4 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Пульт дистанційного керування AccuPel HDG-4. AccuPel HDG-4 11 сторінок.
Друкувати сторінку
HDG-4000 ANALOG/DIGITAL VIDEO CALIBRATION GENERATOR
Sync
HD DVI – Select positive or negative HD digital sync.
HD DVI – Select positive or negative SD digital sync.
HD Y Type – Select Tri-level or Bi-level HD analog YPbPr embedded sync.
HD G Type – Select Tri-level or Bi-level HD analog RGB embedded sync (SoG).
HD HV Time – Select Normal or SMPTE analog RGB HV Sync positioning.
Y/G Phase – Select sub-pixel analog YPbPr embedded sync positioning.
Scope Trigger – Select normal analog HV sync or special V sync for an oscilloscope trigger.
Misc
Info – Serial number, levels, and options information.
Com Ports
RS232 Baud – Baud rate selection.
USB Baud – Baud rate selection.
RS232 Flow – Flow control selection.
RS232 Flow – Flow control selection.
Defaults (Power up)
60/50 Hz – Power up in 60 Hz or 50 Hz mode (HDG-4000 L2 only).
RGB Sync – Power up analog RGB signals with SoG, or Positive or Negative HV sync.
CVBS/YC – Power up with 0 IRE or 7.5 IRE setup for NTSC (480i) CVBS and Y/C signals.
RS232 Baud – Power up baud rate.
USB Baud – Power up baud rate.
User Format – Power up with front panel User Format set to select 1080p24sf, 1080p30, or 1080p48.
Save Items – Save all of the above power up defaults.
HDG-4 USER MANUAL
11