Cinetech BSF HYDRA CLEAN Посібник з експлуатації та технічного обслуговування - Сторінка 20
Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Ультразвуковий очищувач ювелірних виробів Cinetech BSF HYDRA CLEAN. Cinetech BSF HYDRA CLEAN 20 сторінок. Motion picture film cleaner
Друкувати сторінкуSolvent applicator and buffer rollers
Solvent applicator and buffer rollers should be changed when they are dirty, this will depend on the
condition of the film being cleaned.
To replace a buffer roller:
1. Hold the buffer roller and unscrew the outer aluminium locking nut.
2. Gently pull the buffer from the shaft.
3. Pushout the inner aluminium fixing boss (this is designed to be a tight fit to avoid any slippage
whilst the machine is in operation).
4. Push fit the aluminium boss into a new buffer, using a flat surface to ensure the boss fits squarely
inside the buffer.
5. Replace the boss and buffer onto the shaft, ensuring it is fully seated in position, and refit the
locking nut whilst holding the buffer.
When required, clean with the area around the buffers and the internal base of the machine with a damp
cloth to remove any dust/dirt that may accumulate. Use a vacuum cleaner and a soft brush if this is
easier.
Tightening hex screws
Periodically check for tightness all Allen screws and fixings.
CONTACT US
If you need any help or advice, spare parts, or servicing, please contact us.
CINETECH UK LTD
Emai: [email protected]
Website: https://cinetech.uk/
Page 20 of 20