Alphatron EVF Інструкція з експлуатації
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Кріплення для телевізора Alphatron EVF. Alphatron EVF 4 сторінки.
Друкувати сторінку
Please read this manual carefully before using the Alphatron EVF bracket!
!
CAUTION
Please ensure that the Alphatron EVF is aligned correctly to the mounting plate (F)
before tightening the thumbscrew (E). A misalignment of the EVF unit could lead to
damaging the EVF surface.
A
Clamping knob 15mm bars
B
Clamping knob side adjustment
C
Clamping knob length adjustment
D
Clamping knob arm rotation point
E
Thumbscrew EVF
F
EVF mount plate and rotation point
G
Clamping part 15mm bars
Assembling the Alphatron EVF bracket
CAUTION: don't tighten clamping bolt (L) without a 15mm rod
inserted.
Please insert the 15mm rod (J) in the EVF mount part (F) and align
the slot as shown in "figure 2". When the rod is fully inserted and
aligned please tighten bolt (L) using a metric hex-key 3mm. Rotate
the hex-key clockwise to tighten and counter-clockwise to loosen the
bolt.
Note: the EVF mount part can be clamped to any 15mm rod or
accessory mount.
INSTRUCTION MANUAL
Figure 1: Alphatron EVF bracket nomenclature.
H
I
J
K
L
M
N
Instruction Manual: Alphatron EVF bracket
Alphatron EVF bracket
Sliding part
Arm rotation point
15mm rod 180mm (7.1") length
1/4" end cap
Clamp bolt EVF mount
Friction adjustment bolt arm rotation point
Friction adjustment bolt EVF rotation point
Figure 2: Assembling EVF mount part.
EN
Page: 1 / 2