ARC TMT-918 Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Пульт дистанційного керування ARC TMT-918. ARC TMT-918 15 сторінок. Wireless timer remote control

airing:

Pairing using LEARNING MODE:

1. First choose the desired receiver(s) that you wish to control.

2. On the remote control select the desired unit by pressing the 'Unit' button. (Fig. 4)

3. Press the 'Learn' button once (LED will flash), this will now enter learning mode.

4. On the remote control press the 'ON' button intended to be paired; the load will flash twice to

confirm that the remote control is now paired.

NOTE: Learning mode lasts for 12 seconds; if no signal is given to the receiver then it will

automatically exit learning mode without pairing the device.

To exit learning mode manually, simply press the 'Learn' button again.

！If, during learning mode the load does not flash to confirm, this means that the receiver's memory

is FULL and no further remote control may be paired unless one of the existing remote control is

first unpaired (see below).

n-pairing:

Removing single device:

1. On the remote control select the desired unit by pressing the 'Unit' button.

2. With the receiver that you intent to un-pair press the 'Learn' button once (LED will flash), this

will now enter learning mode.

3. On the remote control press the 'OFF' button; the load will flash twice to confirm that the remote

control is now unpaired.

etup:

⚫ Timer programming.

Press the 'TIMER' button for 3 seconds and the number 1 on the LCD screen will start flashing.

This number represents 1 of the 12 memory slots of the timer. (Fig. 5)

Version 2.