ARC MIMST-1703 Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для Аксесуари ARC MIMST-1703. ARC MIMST-1703 13 сторінок. Indoor motion sensor

Issue Date: 23/03/2020

Motion sensor can adjust Lux level depending on the areas used.

Factory pre-setting will be at 'H' Lux level.

⚫

To adjust lux level, simply adjust rotary switch from H-M or M-L and leaving

the motion sensor in a stable environment.

⚫

Motion sensor will only trigger with the lux level lower than the initial lux

setting.

It will not trigger any movement at a higher lux level.

⚫

It is not recommended to position the motion detector with other light

source surround. This may cause incorrect lux detection.

After initial lux level setup, please leave the motion sensor steady for at least

15-20 seconds to allow the sensor to warm up and stable enough to detect.

During this period please keep away from direct light source to avoid misleading

setup.

Ambient light level. (High / Medium / Low)

'H' 24hrs detecting movement in all ambient light level.

⚫

For the use of door chime, please set in 'H' mode.

'M' Approximately 4PM onwards

⚫

Detecting environment brightness level under 20 ± 5 lux.

'L' Approximately 6PM onwards

⚫

Detecting environment brightness level under 10 ± 5 lux.

LUX SETUP

7. Lux Setup