Cino Micro2 Series Посібник із швидкого старту - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Принтер Cino Micro2 Series. Cino Micro2 Series 13 сторінок.

Друкувати сторінку

Indications

Beeping Indications

No.

Battery Status Indications (LED1~LED4)

LED1

LED2

Green

Red

Green

Orange

Red

a. The Micro2 gives 1 warning beeps at 5 seconds intervals when the battery

power is less than 20%~30%.

b. The Micro2 gives 2 warning beeps at 5 seconds intervals when the battery

power is less than 10%~20%.

c. You may check the battery status by pressing the POWER button.

Wireless Communication Indicator

When Micro2 is ready to be connected or is connected by RS232 interface,

the LED1 will become green, and blinking at two seconds intervals. The

LED5 will go on flash blue when the radio link between the printer and host

device is built. Once the radio link is discontinued, the LED5 will go off and

the LED1 will flash green again.

Battery Charging Indicator

The LED6 will go on steady red after connecting the power supply unit if the

battery hasn't been fully charged. When the battery is fully charged, the LED6

will go off.

Beeping Indications

3 short beeps in ascending tone

3 short beeps in descending tone

1 beep at 5 seconds intervals

2 beeps at 5 seconds intervals

2 long beeps

1 short beep

3 short beeps in descending tone

1 short beep

LED3

Green

Red

Power on indication

Power off indication

20%~30% of battery remains

10%~20% of battery remains

Error warning

Radio link built

Radio link lost

Press POWER or FEED button

Close the compartment cover

LED4

More than 90% of battery remains

Green

Red

More than 70% of battery remains

More than 60% of battery remains

More than 50% of battery remains

More than 40% of battery remains

More than 30% of battery remains

More than 20% of battery remains

Less than 20% of battery remains

Less than 10% of battery remains

Description

Battery Status