Arc-Zone Neutra LTG Посібник з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з експлуатації для М'ясорубка Arc-Zone Neutra LTG. Arc-Zone Neutra LTG 7 сторінок. Tungsen grinder

Друкувати сторінку
Neutra LTG Tungsten Electrode Grinder
The Safe, Super-Efficient and Environmentally-Friendly Tungsten Grinding Solution!
Thank you for purchasing the Arc-Zone.com® Neutra LTG Liquid -Cooled Tungsten Electrode
Grinder. We appreciate your choice of this high-quality product, you can expect many years of
reliable service. Your new grinding machine is a precision instrument and comes with a one-year
warranty against manufacturing defects.
Designed to meet strict European environmental and workplace safety standards, our liquid-cooled
tungsten grinder optimizes your tungsten electrode grinding operation, weighs just 16 pounds and
grinds up to 3/16" (4.8mm) diameter with a 20ra surface finish.
With this precision grinding instrument you can prepare precision ground electrodes
from .040" (1.0mm) to 3/16" (4.8mm) in diameter, quickly and consistently!
Read this entire manual prior to set-up and operation of your new tungsten grinder. If you have a
question about your Neutra LTG or this manual please contact us at 1.800.944.2243 for assistance.

Safety information

Read Safety Precautions Carefully
Note: This Precision Machine Is Designed To Grind Tungsten Electrodes Only!
•
When not grinding electrodes, turn grinder off for safety purposes and decreased wear on the
precision electric motor.
•
Wear proper safety apparel. Do not wear loose clothing, neckties, rings, bracelets, or other
jewelry, which may get caught in the machine.
•
Wear safety glasses.
•
Never operate power tools when tired, intoxicated, or when taking medication that cause
drowsiness.
•
Use a grounded three-prong-plug, and plug directly into a three-prong-outlet.
•
Keep visitors a safe distance from work area.
•
Always unplug grinder prior to inspection.
•
Read this manual thoroughly for specific adjustments and operating procedures.
•
To ensure consistent electrode preparation, replace damaged parts.
•
Make sure that the grinder is off before plugging it in.
•
Do not apply extreme force to the tungsten while grinding. This may cause your grinder to jam
or cause premature grinding wheel wear.
•
Never leave the grinder unattended while running.
•
Turn the grinder off when you complete the grinding operation and do not leave it until it comes
to a complete stop.
•
Remove all fluid from the grinder for transportation and store fluid in an appropriate container.
•
Know your grinder; learn its operation, applications and limitations.
Arc-Zone.com, Inc. • 1331 Specialty Dr • Vista, CA 92081 • Tel. 1.760.931.1500