Cipax CPX 23020 Встановлення та користувач - Сторінка 10
Переглянути онлайн або завантажити pdf Встановлення та користувач для Танкове обладнання Cipax CPX 23020. Cipax CPX 23020 18 сторінок. Closed tank 3000l
Також для Cipax CPX 23020: Посібник з монтажу (10 сторінок)
Друкувати сторінкуGeneral
The Cipax 3000 L closed tank, Part No. 23020, is rotationally moulded in impact resistant and
durable polythene plastic to be used for:
-Greywater (Water from washbasins, dishwashers and washing machines)
-Sewage (blackwater)
-Rainwater
-Drinking water. The tank is manufactured using an FC-approved material. (FC=Food
Contact). Contact the supplier for further information.
The tank is not intended for use as a septic tank.
RISE, former SP (The Technical Research Institute of Sweden) has performed control of
strength testing, granting approval in accordance with EN-12566-1.
The tank is delivered as standard with a lockable cover, which is also produced from
rotationally moulded polyethylene plastic. The cover has been tested and approved by SP in
accordance with the Swedish National Board of Housing's handbook for "Childproof wells"
and SP method 0487 Trample Test version 3.
The tank can be installed above or below ground.
Remember to:
Contact Environment and Health in the municipality concerned before installation to find out
what rules apply locally.
Warranty
The installation and user manual must be followed.
If the tank and its other components are subjected to negligent treatment or if the
installation and user manual are not followed, this may void the warranty.
Safety
The cover must be locked and unlocked using
the correct tools, e.g. a socket tool.
The cover must always be locked when placed on the tank.
Warning!
Never enter a tank that is in use.
The gases may lead to unconsciousness
and pose a life-threatening hazard.
10