ABB ARC600 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Контролер ABB ARC600. ABB ARC600 4 сторінки. Wireless controller

Друкувати сторінку

Q U I C K S TA R T G U I D E A R C 6 0 0 W I R E L E S S C O N T R O L L E R

—

Getting started

Power supply

Operating power for ARC600 is supplied through the

connector X2.1. ARC600 can use either AC line input

(pins 1 and 2) or DC input (pins 6 and 7).

In some situations, the device does not boot

directly from a DC voltage. In this case, you should

apply the AC voltage for a moment (devices' deep discharge

protection reset) after which you can connect the

DC supply voltage as usual.

Power-up and SIM card installation

Insert the SIM card. Push the yellow button in the SIM card

slot to eject the SIM card tray. Insert the SIM card to the

tray (contacts facing up) and push it firmly and carefully

back to its holder. Attach the power supply and switch the

device on. Under normal circumstances, the device is able

to automatically connect to the operator's cellular network.

In problem situations you can log in to the Arctic Web user

interface by using a Web browser and navigating to

Network → Mobile

WAN.

If your SIM card requires a PIN code, do not install

it before you have configured the Arctic device

PIN code settings.

—

Figure 1. Browser https example

Connect the Ethernet cable between the Arctic device

LAN port and your computer.

Configure your computer to use the same IP address space

as the Arctic device. For example, your computer IP could

be 10.10.10.11 with netmask 255.255.255.0. Check the

connection with the ping command.

Connect to the Arctic device using the web browser.

The default address of the Arctic device is https://10.10.10.10/.

https

Remember to use

and not http.

Accept the self-signed certificate in the browser.

default password is arcticm2m.

It is highly recommended that the default

is changed

before the product is connected to a public

cellular network.

—

Figure 2. Welcome page in the ARC600 Web user interface

arctic-adm

and the

password