Arcam P90 Посібник - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник для Підсилювач Arcam P90. Arcam P90 15 сторінок.
Друкувати сторінку
Installation: P90 power amplifer
VOLTAGE
SELECT
POWER INLET
Connecting to power, loudspeakers and
other equipment
Follow the installation instructions for the integrated amplifier on
pages 4 and 5.
AUDIO IN
amplifier or the
MONO LINK
two mono loudspeaker outputs from a single input. Pull out
the link supplied and use it to connect the
sockets together. Using one power amplifier per loudspeaker
will enable you to bi-amplify bi-wireable loudspeakers.
This is particularly beneficial for top quality stereo installations
with a separate pre-amplifier, or where amplifiers are provided
for the left, centre and right channel loudspeakers in a five
speaker Dolby Pro Logic or Dolby Digital system.
Contact your Arcam dealer for more information.
"Daisy chaining" – The power amplifier can be connected to
further power amplifiers to drive more speakers (e.g. those in
other rooms or tri-amplified speakers, etc).
Connect the extra power amplifier inputs to the
sockets on the power amplifier, left to left, right to right.
A90/P90
10
+
–
+
R/CH1
SP2
4 – 16 OHMS
TRIG
OUT
SP1
REMOTE
IN
+
–
+
R/CH1
– Connect this input to the output sockets of your pre-
sockets of an integrated amplifier.
PRE OUT
– The power amplifier can be adapted to provide
–
L/CH2
AUDIO
L
R
–
L/CH2
IN
OUT
Remote switching
By making a connection from the
power amplifier to the
amplifier, you can use the A90 to switch the power amplifier on
and off. If configured in this way, the front panel
of the A90 (or the
control) switches both amplifiers on and off together. This facility
allows you to conceal the power amplifier yet still control it.
The connecting cable required is a 3.5mm to 3.5mm jack lead
and
L
R AUDIO OUT
(stereo or mono) and it is possible to connect several power
amplifiers to an A90 by 'daisy chaining' from
P90 into the
Three channel option
The power amplifier can be upgraded from stereo to three
channels by adding a Third Channel Module: in this case, the
model is designated P90/3.
The module offers extra loudspeaker terminals together with a
third set of
P90 into a 3 x 90W (RMS per channel into 8Ω) amplifier suitable
AUDIO OUT
for Home Cinema or multi-channel audio use.
Contact your Arcam dealer for further details.
+
CTR/CH3
SP2
LINK
4 – 16 OHMS
SP1
+
CTR/CH3
Optional Third Channel Module
– provides a third 90W channel
suitable for Home Cinema or
multi-channel audio use.
REMOTE IN
socket of the A90 integrated
TRIG OUT
POWER/STANDBY
of the next.
REMOTE IN
and
phono sockets and converts the
AUDIO IN
OUT
–
CTR/CH3
AUDIO
IN
OUT
–
socket of the P90
button
POWER
button on the remote
of one
TRIG OUT