Axus ELEGANCY ELJ-1400FC Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Зберігання Axus ELEGANCY ELJ-1400FC. Axus ELEGANCY ELJ-1400FC 19 сторінок. Elegancy elj-1400 series
Друкувати сторінкуCHARPER 3. CONFIGURING THE FIBRE CHANNEL
This Chapter provides a detail information for the cabling of ELJ-1400 and the
device ID setting.
Cabling
Port A In/Out
The Fibre channel Interface module at the rear panel provide the connectivity
between the host computer and disk drives by a DB9 connector on a Fibre channel
cable. Each and every ELJ-1400 install 2 Fibre channel Interface module as the
standard, representing that there is a full redundancy and hot swappable for the Fibre
channel Loop. In a daisy chain configuration, up to 8 of ELJ-1400 can be connected
on the loop.
Loop B.
Loopback Plug .
Port A In/Out
0-7 Thumbwheel
ID switch
Host Computer
Port B In/Out
Port B In/Out
0-15 Thumbwheel ID
switch
Loop A.
Loopback Plug .
12