Axus AXP15 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Клавіатура Axus AXP15. Axus AXP15 4 сторінки. Portable electronic keyboard

Друкувати сторінку

Precautions

Please read them carefully before you use the instrument.

Warning!

• Use the specified power adapter, and immediately replace damaged adapter if any.

• Do not disassemble the instrument, nor modify internal parts. If it malfunctions,

discontinue the use immediately and have it repaired by professional serviceman.

• Before connecting the instrument to other devices, turn off all the power supplies.

• Do not play the instrument at the maximum volume or to an uncomfortable extent for

a long time.

• Keep the parts of the instrument off heat source, for overheat may cause damage.

• Prevent liquid, dust, particles and other foreign matters from entering the

instrument to cause corrosion of the instrument or short-circuit of its components.

• Pull the plug before cleaning the instrument. Do not insert or pull the plug with wet

hands.

• Use dry and soft cloth to clean the instrument. Do not use paint, alcohol or other

chemical solvents to wipe the instrument so as to avoid damage to the instrument

surface.

• Turn off the power supply and pull the plug after playing or in no-service condition

for a long time.

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture. The apparatus shall not be exposed to dripping or splashing and that no

objects filled with liquids, such as vases, shall be placed on the apparatus.

• Maximum Operating Temperature:40

• Direct plug-in adaptor is used as disconnect device, the disconnect device shall

remain readily operable.

• Do not install this equipment in a confined space such as a book case or similar unit,

and remain a well ventilation conditions .. The ventilation should not be impeded by

covering the ventilation openings with items such as newspaper, table-cloths,

curtains etc.

Correct Disposal of this product. This marking indicates that this product should

not be disposed with other household wastes throughout the EU. To prevent

possible harm to the environment or human health from uncontrolled waste

disposal, recycle it responsibly to promote the sustainable reuse of material

resources. To return your used device, please use the return and collection systems

or contact the retailer where the product was purchased. They can take this product

for environmental safe recycling.

• Warning: Batteries shall not be exposed to excessive heat such as sunshine, fire or

the like.

• Caution: Danger of explosion if battery is incorrectly replaced.Replace only with the

same or equivalent type.

• Warning:Excessive sound pressure from earphones and headphones can cause

hearing loss.

• No naked flame sources, such as lighted candles, should be placed on the apparatus;

• The rating label is on bottom enclosure.

• warning! That batteries (battery pack or batteries installed) shall not be exposed to

excessive heat such as sunshine, fire or the like.

□

Illustration of the Panel Controls

®@@® �®§.ll

� r�r�t�! 1 1 ! f �J1 ! � T �

(j)

��l ,

IIJ , 1 � ' 1 11 \ rn

o·- --��" - ..

0 Loudspeaker

® Power Switch

G)One Key / Ensemble @Sync

©Vibrato

©Aecom Volume ®Sustain

®Master Volume @Digital Display

□

Preparation for Performance

1. Installation of batteries

Install six pieces of 1.5V AA size batteries into the battery compartment. Please

pay attention to the battery polarity.

Note: when the voltage of the batteries drops down and the instrument cannot

perform naturally, the batteries should be changed in time. If the instrument is left

unused for a long time, the batteries should be taken out to avoid causing damage.

2. Using AC/DC Power Supply Adaptor

The AC/DC power supply adaptor must be the one designated for the instrument.

Please connect one side of the power supply socket on the back-panel and the other

to the city-power network (Please notice the input voltage should be the same as that

of the power network. ).

3. Using MIC or connection with Amplifiers

(1) Insert the electret mike into the MIC jack, then singing and playing on the

instrument can be enlarged.

(2) Insert the plug of the double-track sound box into the OUT jack, then the

effect of the performance can be strengthened.

: : : i '

Ox0x0<0J<.0

@Start/Stop @ Chord Off @Rhythm

@ Ree

@Number Buttons

@Fill-In

@ Prag

@) Percussion Keys

@Single

@Play

@Chord Keys

@Fingered

@Timbre

0MICJACK

®OUT JACK