Arcam Alpha 8 Посібник - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник для Тюнер Arcam Alpha 8. Arcam Alpha 8 11 сторінок. Arcam tuner handbook
Також для Arcam Alpha 8: Посібник (8 сторінок), Посібник (12 сторінок), Посібник (8 сторінок), Посібник з експлуатації (17 сторінок), Посібник (8 сторінок)

ENGLISH

(Stacking the units on top of each other will reduce the

sound quality slightly. It will also reduce ventilation and

consequently

the

continuous

power

handling

capability).

■

The existing integrated amplifier should be used to

drive the loudspeakers' HF (high frequency or treble)

units. The new Alpha 8P is utilised for the LF (low

frequency or bass) drivers, as shown in the wiring

diagram below.

■

At the end of a listening session the Alpha 8P should

always be turned off first.

■

High quality interconnect cables should be used

between the integrated amplifier and Alpha 8P.

■

The use of high quality interconnect and speaker

cables in your system is essential to obtain good

sound quality. Contact your dealer for further details.

Note: The second set of speaker terminals (SP2) on both

units can be used to drive extra loudspeakers in other

rooms provided the impedance of these is 8 ohms or

more.

■

WARNING - Ensure that the TERMINAL LINKS

ARE

REMOVED

from

your

biwireable

loudspeakers before switching on the amplifiers.

Failure to do this could cause damage to one or

both amplifiers and this is not covered under the

warranty.

SAFETY STANDARD

■

These products have been designed to meet the lEC

65 international electrical safety standard.