Arcam T32 Посібник - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник для Тюнер Arcam T32. Arcam T32 20 сторінок.
operation
����
����
����
��
Front panel operation
These functions can also be controlled by the CR90
remote control. (See pages 14 for details.)
STANDBY
Press
to switch the tuner between On (green
sTandby
light) and Standby (red light). (Equivalent to P on
remote control.)
DISP
Press
to cycle through the brightness settings of the
disp
front-panel display. (Equivalent to D on remote control.)
MENU
Press
to access the setup menu. Use the
Menu
Navigation buttons to move between menu items and
the Control knob to change settings within an item.
(Equivalent to U on remote control.)
Navigation buttons
Use
6
or
5
to change signal sources between AM,
FM, DAB*, Sirius* and iPod/Aux (Equivalent to M on
remote control). The Navigation buttons are also used to
move between items in the setup menu.
INFO
Press
to change the type of information shown on
info
the second line of the front panel display, depending on
the source signal. (Equivalent to i on remote control.)
* Where fitted/available
���
���
����
����
����
OK
Press
to confirm a digital radio channel selection or a
oK
preset selection. (Equivalent to O on remote control.)
Control knob
Used to manually tune stations by selecting a frequency, or
to cycle through stations (DAB, Sirius) or stored presets.
Also used to select settings within a setup menu item.
Preset buttons (1–8, 2–9, etc.)
Press a Preset button briefly to select the first preset
number listed (Preset 1, for example). Press and hold
the button for one second to select the second number
listed (Preset 8, for example). In this way, up to 14 preset
stations can be accessed from the front panel.
To access stations beyond 14 (up to a maximum of 100),
use the remote control, or the Control knob with
PRESET
Press
to recall a station or channel stored as a
pReseT
preset. You can quickly cycle through all the presets
using the Control knob, selecting a preset value with the
button (see page 13).
oK
Alternatively, use the numeric keypad on the remote
control to select a preset directly.
STORE
This button allows you to assign a currently tuned radio
station to the next free preset number – or to a chosen
preset number. See 'Storing a preset' on page 13.
E-10
���������
����
����
������
�����
�������
.
oK