Arcan Blackline ALJ3TV Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Валети. Arcan Blackline ALJ3TV. Arcan Blackline ALJ3TV 7 сторінок. 3 ton aluminum service jack
TROUBLESHOOTING
Important: Service jacks are self-contained devices used for lifting, but not sustaining, a partial vehicular load. In accordance with
ASME PASE-2019 Load Sustaining Test: "A load not less than the rated capacity...shall not lower more than 1/8" (3.18mm) in the first
minute, nor a total of .1875" (4.76mm) in 10 minutes." Lowering within this range is considered normal operation and is NOT a
warrantable defect.
PROBLEM
1. Unit will not lift rated load.
2. Unit will not sustain rated load or feels "spongy" under rated
load.
3. Unit will not lift to full height.
4. Unit will not lower completely.
5. Handle tends to raise up while the unit is under rated load.
6. Unit still does not operate.
SPECIFICATIONS
Capacity
Minimum Lift Height in.
Maximum Lift Height in.
Rear Caster Size in.
Front Wheel Size in.
Saddle Diameter in.
LIMITED WARRANTY
ARCAN® PROFESSIONAL TOOLS WARRANTS TO ITS CUSTOMERS THAT THE COMPANY'S ARCAN®
PROFESSIONAL TOOLS BRANDED PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND
MATERIALS.
Arcan® Professional Tools will repair or replace its Arcan® Professional Tools branded products which fail to give
satisfactory service due to defective workmanship or materials, based upon the terms and conditions of the following
described warranty plans attributed to that specific product. This product carries a ONE-YEAR warranty. During this
warranty period, Arcan® Professional Tools will repair or replace at our option any part or unit which proves to be
defective in material or workmanship.
Other important warranty information:
This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does
not cover any repairs or replacement made by anyone other than Arcan® Professional Tools. The foregoing obligation is
Arcan® Professional Tools' sole liability under this or any implied warranty and under no circumstances shall we be liable
for any incidental or consequential damages.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. If you have any questions about warranty service, please contact Arcan®
Professional Tools. This warranty gives you specific legal rights and you may also have other rights which vary from state
to state.
1-800-879-7316
Monday - Friday 8:30am to 5:30pm EST
P.O. Box 1203
Travelers Rest, South Carolina 29690
ALJ3TV
3 Tons
Handle Length in.
3.85"
Product Length in.
19.4"
Product Width in.
1.98"
Product Height in.
2.57"
Product Weight lbs.
4.57"
Shipping Weight lbs.
ACTION
Purge air from hydraulic system by following procedure under
SETUP.
Purge air from hydraulic system as above.
Purge air from hydraulic system as above.
Check oil level. Make sure hydraulic system is not overfilled.
Pump the handle rapidly several times to push oil past ball valves in
power unit.
Contact customer service
47.4"
26.97"
12.83"
6.69"
55 lbs.
60.8 lbs
7
.
04/21/2023