Creche Innovations MicroCool Інструкції щодо режиму роботи станції - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкції щодо режиму роботи станції для Освітлювальне обладнання Creche Innovations MicroCool. Creche Innovations MicroCool 8 сторінок. Led examination light
Також для Creche Innovations MicroCool: Інструкція з експлуатації (12 сторінок), Посібник користувача (12 сторінок)
Друкувати сторінку
Getting Started
Two operating modes:
1. Station mode (repeated use with the same code)
2. Locker mode (use with a temporary code)
The operating mode is specified at the time of order. To determine which operating mode the lock is in, remove the battery, press and
release the program button, and reinsert the battery. Note the color sequence of the LED flashes when the battery is reinserted:
☼
(
green, red, yellow) indicates station mode
☼
(
green, yellow, red) indicates locker mode
Multiple levels of access:
1.Master code and/or blue control key fob
2.Supervisor code and/or black key fob
3.User code and/or black key fob
Note: The
MicroCool Digital Lock
Operation:
Unlock with a code by entering a valid code. The green LED will illuminate. Push the button to unlock. To
lock, simply push the door or drawer until the
Programming Chart Symbols:
P
= press program button
Program button:
Initiate the lock programming mode by pressing the front thin edge of the black
button inward toward the mounting surface the MicroCool Digital Lock is
mounted to
Infrared Receiver:
The Infrared Receiver will receive a signal from an e lectronic TriTeq key fob
when it is pointed at the receiver located behind the Program button. The
Program button is slightly opaque so the key - fob signal will penetrate the
button.
Push button :
Press to unlock door .
The factory master code is: 135243
The factory supervisor code is: 123
is pre-programmed with a factory master code and a factory supervisor code.
MicroCool Digital Lock
lock will self-lock.