ABB Jokab Safety Safeball JSTD1 Оригінальна інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для Контролер ABB Jokab Safety Safeball JSTD1. ABB Jokab Safety Safeball JSTD1 15 сторінок. One/two hand enabling device
Також для ABB Jokab Safety Safeball JSTD1: Оригінальна інструкція з експлуатації (16 сторінок)
Друкувати сторінку
1
Introduction
Scope
The purpose of these instructions is to describe the one hand device Safeball, how to set up a two hand device,
and to provide the necessary information required for installation, mounting, checks after installation, operation and
limitations.
Audience
This document is intended for authorized installation personnel.
Prerequisites
It is assumed that the reader of this document has knowledge of the following:
Basic knowledge of ABB Jokab Safety products.
Knowledge of two hand enabling devices.
Knowledge of machine safety.
Special notes
Pay attention to the following special notes in the document:
Danger of severe personal injury!
Warning!
An instruction or procedure which, if not carried out correctly, may result in injury to the technician
or other personnel.
Danger of damage to the equipment!
Caution!
An instruction or procedure which, if not carried out correctly, may damage the equipment.
NB:
Notes are used to provide important or explanatory information.
2TLC172182M0201, rev. F
2015-12-04
4
www.abb.com/jokabsafety