Digicom 3G SoHo Посібник - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник для Шлюз Digicom 3G SoHo. Digicom 3G SoHo 20 сторінок. Wireless 3g gateway hsdpa & hsupa station
Також для Digicom 3G SoHo: Технічні характеристики (4 сторінок)

Друкувати сторінку

3G Industrial

2.2. BATTERY BACKUP

The battery backup (optional) is placed into the product.

Battery backup features: Li-ion 7,4V 1700mAh

To connect and install the backup battery:

• Device must be powered off. Screw on both sides (4 screws) as shown in the picture

• Open 3G Industrial and place the battery as shown. Use a biadhesive tape to fix it to the case.

• The same picture shows how to insert the connector in the card:

• Close the device and screw it again.

2.2.1. Replacement of battery

The battery is sticked on the device.

To replace it, disconnect the connector from the card and gently remove the battery.

Note: You are advised to use battery supplied by Digicom only.

Installation

2.3