Epson 11880 - Stylus Pro Color Inkjet Printer Короткий довідник - Сторінка 5

Переглянути онлайн або завантажити pdf Короткий довідник для Принтер Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 14 сторінок. Stylus pro11880
Також для Epson 11880 - Stylus Pro Color Inkjet Printer: Брошура (1 сторінок), Брошура та технічні характеристики (8 сторінок), Посібник з розпакування та налаштування (28 сторінок), Посібник з експлуатації мережі (46 сторінок), Інформаційний посібник про продукт (10 сторінок), Обмежена гарантія (12 сторінок), Брошура та технічні характеристики (7 сторінок), Брошура та технічні характеристики (8 сторінок)

Друкувати сторінку

Epson 11880 - Stylus Pro Color Inkjet Printer Короткий довідник

1. Replacing Printer Parts

Loading and Using Cut Sheet Paper

Remove any roll paper from the paper path. Make

sure the printer is on and the roll paper cover is

closed.

Press the Paper Source button until the icon

appears on the LCD.

Release the paper lever. If the lever is locked, press

and hold the button for 3 seconds to unlock it.

Note:

If you're printing on small sheets or fine art

paper, do not release the paper lever.

Feed the sheet into the paper slot until it meets

resistance. Make sure the right and bottom edges

of the paper are straight and aligned with the

horizontal and vertical lines on the printer.

If you released the paper lever, return it to the

locked position.

Press the Pause button. The sheet feeds into the

printing position automatically.

Caution:

To avoid damaging the printer, never move

the paper lever during printing, or while the Power

or Pause light is flashing.

Print your page. After it is finished, the sheet stays

in the printer.

To remove your print, press the

button.

Printing on Posterboard

When you print on posterboard or other thick media

(more than 19 mil thick), you should open the front

cover before loading as described below.

Make sure the printer is on and the roll paper cover

is closed.

Press the Paper Source button until the icon

appears on the LCD.

Release the paper lever. If the lever is locked, press

and hold the button for 3 seconds to unlock it.

Open the front cover. (The cover has a lip that acts

as a paper support when the cover is open.)

Feed the posterboard into the paper slot until it

meets resistance.

Align the board with the scale on the roll paper

cover.

Return the paper lever to the locked position. Then

close the front cover.

Press the Pause button. The board feeds into the

printing position automatically.

Run your print job. After it is finished, the

posterboard stays in the printer.

To remove the print, hold it and release the

paper lever.