Start Here
EPSON Expression
1680 Pro Series
®
1
Unpack Your Scanner
1
Make sure you have everything:
Scanner
Reflective
document mat
Screws
Film holders
User's Guide
CD-ROM with
®
EPSON
and electronic manual
LaserSoft
®
SilverFast
®
A6 Kit
Adobe
®
Photoshop
Elements 2.0
CD-ROM
IT8 Calibration Kit
ArcSoft
®
Software Suite
CD-ROM
MonacoEZcolor
®
2
CD-ROM Package
Power cord
IEEE 1394 FireWire
USB cable
interface cable
(Professional FireWire
model only)
2
Remove all the packing tape, but leave the two yellow stickers in place
until instructed to remove them.
IMPORTANT!
Leave the stickers in place until
you are instructed to remove them.
STOP: Be sure to install your scanner software first
BEFORE you connect the scanner!
See your Start Here sheet for details.
2
Install the Software
Wait! You must install your software before connecting the
scanner to your computer.
Be sure to close all open programs and turn off any virus
protection programs.
If you don't already have Adobe Photoshop or Photoshop Elements on your
computer, install Photoshop Elements from the CD-ROM included with your
scanner. To view the Photoshop Elements user manual, you'll need Adobe
®
®
Acrobat
Reader
(included on your Photoshop Elements CD).
Windows
®
First you'll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
Transparency
unit
1
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive. The installer starts automatically.
2
Click Next on the first screen. Make sure US English is selected and
click Next again.
3
Follow the on-screen instructions to begin installation and accept the
software license conditions.
4
When you see this screen,
click the Adobe Photoshop
Elements button.
5
Follow the on-screen instructions.
When you're asked for a software
serial number, enter the number
Scan driver
printed on the sticker attached to
the CD-ROM sleeve.
6
If you don't have Acrobat Reader,
eject the CD-ROM and repeat
steps 1 to 3. Then select Adobe
Acrobat Reader to install it.
®
Continue with the instructions below to install the scanner software.
Scanner Software
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
The installer starts automatically.
If it doesn't start, double-click
My Computer (in Windows XP,
click Start > My Computer), double-click
double-click
EPSON.
2
You see a message to close all applications. Click OK.
3
Read the license agreement, then click Agree.
4
At the Software Installation screen,
click Install.
®
5
Wait for EPSON Scan and the
User's Guide to be installed.
6
At the last screen, click Exit.
The EPSON Product Registration
screen appears.
7
Register your scanner as instructed. At the last screen, click Done
or close your browser.
8
Remove the CD-ROM.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software Suite
following the instructions included with each program. Then continue with
the instructions under "Install the Transparency Unit."
Macintosh
®
First you'll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
1
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM
or DVD drive.
2
Double-click the
or
English folder.
3
Double-click the Install Photoshop Elements icon.
4
Follow the on-screen instructions to begin installation and accept the
software license conditions. In Mac
name and password, then click OK.
5
When you're asked for a software serial number, enter the number
printed on the sticker attached to the CD-ROM sleeve.
6
When you see this screen, click the
Install button.
7
Follow the on-screen instructions
to install the software.
8
When you're finished, click Quit.
9
If you don't have Acrobat Reader, you can install it from the CD-ROM.
Open the Adobe Acrobat Reader folder. Then double-click the Acrobat
Reader Installer icon to install it.
Continue with the following instructions to install the scanner software.
Scanner Software
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
(If necessary, double-click the
2
Double-click
.
3
You see a message to close all applications. Click OK.
4
Read the license agreement,
then click Agree.
5
When the Software Installation
screen appears, click Install.
6
Follow the on-screen instructions
to install your User's Guide. When
you're done installing the guide,
click Quit.
EPSON, then
7
In Mac
®
OS X, enter your Administrator name and password when
prompted, then click OK.
8
Read the license agreement,
then click Accept.
9
When you see the EPSON Scan
Installer screen, select EPSON
Expression 1680 in the Easy Install
menu and click Install.
10
Mac OS X: At the last screen, click Exit. The EPSON Product
Registration screen appears.
Mac OS 8.6 - 9.x: When you're done installing, restart your Macintosh.
The EPSON Product Registration screen appears.
11
Register your scanner as instructed. When finished, click Done
or close your browser.
12
Remove the CD-ROM.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software
Suite, following the instructions included with each program. Then continue
with the instructions under "Install the Transparency Unit."
Note: LaserSoft SilverFast requires Mac OS 9.2 or later.
3
Install the
Transparency Unit
Before you connect the scanner to your computer,
install the transparency unit.
1
Remove the yellow tape from
CD-ROM icon and double-click the
the back of the scanner.
®
OS X, enter your Administrator
2
Remove the scanner cover by
grasping the back of the cover
and easing it up.
3
Place the transparency unit on a flat surface, glass side up.
Remove the tape. Then remove the shipping screw from
the hole labeled CLAMP and install it in the hole labeled STOCK.
Caution: Never use the transparency unit without removing the shipping
screw from the hole labeled CLAMP. You may damage the unit.
EPSON CD-ROM icon to open it.)
4
Position the slots on the transparency
unit's bracket over the two large
screws at the back of the scanner.
Slide the transparency unit forward
slightly until the two holes in front
of these slots line up with the
small screw holes at the back of
the scanner.
5
Insert the two screws that came with the
transparency unit into the screw holes,
and tighten them with a coin.
6
Gently close the transparency unit. Connect the transparency unit
cable to the OPTION connector at the back of the scanner and
tighten the screws.
STOP: Be sure to install your scanner software first
BEFORE you connect the scanner!
See your Start Here sheet for details.
Turn over
Друкувати сторінку