Epson 2080 - LQ B/W Dot-matrix Printer Посібник - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник для Принтер Epson 2080 - LQ B/W Dot-matrix Printer. Epson 2080 - LQ B/W Dot-matrix Printer 29 сторінок. Impact printer
Також для Epson 2080 - LQ B/W Dot-matrix Printer: Технічні характеристики (2 сторінок)
![Epson 2080 - LQ B/W Dot-matrix Printer Посібник](/uploads/products/server2/464525/464525.png)
EPSON LQ-2080
Printing on Single Sheets
Your printer has two paper entry slots for printing on single
sheets: top and front. When continuous paper is loaded on the
front or rear push tractor, you can load single sheets in the top
or front slot without removing the continuous paper.
This section helps you determine which paper slot best suits
your single-sheet printing needs.
Loading paper in the top slot
You can load ordinary single sheets, single-sheet multipart
forms, envelopes, or postcards in the top slot.
Note:
Load envelopes only in the top slot.
Loading paper in the front slot
You can load ordinary single sheets, single-sheet multipart
forms, or postcards in the front slot.
Note:
Always use the front paper slot to load single-sheet multipart forms
that are bound by line gluing only at the side.
10 - EPSON LQ-2080
Paper Release Lever Positions
You can load paper in the printer from various paper
sources, such as the front push tractor or the paper guide.
You set the paper release lever to indicate the paper source
you want to use. The table below describes each paper release
lever position.
Paper release
lever position
Description
Single-sheet position
For loading single-sheet paper from the top or front
slot.
Rear push tractor position
For loading continuous paper from the tractor installed
in the rear push position. Also set the lever to this
position when using the rear push and pull tractors in
combination.
Front push tractor position
For loading continuous paper from the tractor installed
in the front push position. Also set the lever to this
position when using the front push and pull tractors in
combination.
Pull tractor position
For loading continuous paper from the tractor installed
on top of the printer in the pull position. When the
tractor is in the pull position, you can load paper in the
front, rear, or bottom slot.
Note:
You can load two different types of continuous paper onto the front
and rear push tractors, and easily switch between them using the
paper release lever. Before moving the paper release lever, always
Load/Eject
press the
button to feed the paper in the paper path
backward to the standby position.
2/99
paper release
lever