Epson 570e - LQ B/W Dot-matrix Printer Короткий довідник - Сторінка 15
Переглянути онлайн або завантажити pdf Короткий довідник для Принтер Epson 570e - LQ B/W Dot-matrix Printer. Epson 570e - LQ B/W Dot-matrix Printer 15 сторінок. Warranty statement
Також для Epson 570e - LQ B/W Dot-matrix Printer: Інформаційний посібник про продукт (18 сторінок), Технічні характеристики (2 сторінок), Обмежена гарантія (1 сторінок)
If Your Printer Stops Printing Unexpectedly...
Check the printer's control panel lights and follow the appropriate instructions below. For more
information, see Chapter 7 of your User's Guide.
Cause
The printer is paused.
You moved the paper release lever while
paper from another paper source was in
the paper path.
* If you are using the pull tractor, see your User's Guide for instructions.
Cause
No paper is loaded in the selected paper
source or paper is not loaded correctly.
Paper is jammed in the printer.
Cause
Continuous paper is not fed to the standby
position.
A single sheet of paper is not fully ejected.
Paper is jammed in the printer.
The printer stops printing and the Pause light is on.
Solution
Press the Pause button to resume printing.
Move the paper release lever back to the appropriate
position and press the Load/Eject button to feed the paper
out of the paper path. Then set the lever to the position you
want to use. Press the Pause button to turn off the Pause
*
light, if necessary.
The Paper Out and Pause lights are on.
Solution
Load paper in the printer, then press the Pause button to
turn off the Pause light, if necessary.
See "Clearing Paper Jams" on page 12.
The Paper Out light is flashing and the Pause light is on.
Solution
Tear off the printed document at the perforation; then press
the Load/Eject button. The printer feeds the paper to the
standby position. Press the Pause button to turn off the
Pause light.
Press the Load/Eject button to eject the sheet. Then press
the Pause button to turn off the Pause light, if necessary.
See "Clearing Paper Jams" on page 12.