Epson 780 Інструкція з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Принтер Epson 780. Epson 780 9 сторінок.

Stopping

2) Roll up the Plastic Valve.

5. Firstly use a needle to poke the film of the cartridge (Picture A); Then insert the vacuum

pump into the holes of Cartridge as the below picture shown and pull the plunger

backward (Picture B); Stop pulling the plunger till ink flows into the vacuum pump;

(Picture A)

6. Measure 13cm from the edge of the printer and make a mark: then tear off the sticker

(Picture A) and attach Support Arm to the printer as the Picture B shows.

Working

(Picture B)