Epson 890N - FX B/W Dot-matrix Printer Посібник користувача - Сторінка 28

Переглянути онлайн або завантажити pdf Посібник користувача для Принтер Epson 890N - FX B/W Dot-matrix Printer. Epson 890N - FX B/W Dot-matrix Printer 48 сторінок. Impact printers
Також для Epson 890N - FX B/W Dot-matrix Printer: Посібник (11 сторінок), Інформаційний посібник про продукт (19 сторінок), Технічні характеристики (2 сторінок), Технічна довідка (7 сторінок)

Loading Special Papers

Follow the guidelines in this section when loading single-sheet multipart

forms, labels, envelopes, and postcards.

To load single-sheet multipart forms, use the front paper entry slot with

the optional front paper guide or front sheet guide installed. Thick paper,

such as multipart forms with five or six parts, requires a straight paper

path to avoid paper jams. For more information, see the Reference Guide.

When printing on labels, use only the type of labels that are mounted on

continuous backing sheets with sprocket holes for use with a tractor

feeder. Do not try to print on single sheets with labels because the printer

may not feed labels on a shiny backing sheet properly.

Thick paper, such as continuous paper with labels, requires a straight or

almost straight paper path. You can load labels in the front (to the pull

tractor) or bottom (pull tractor) paper slot.

The loading procedure for continuous paper with labels is the same as

that for ordinary continuous paper, except you must set the

paper-thickness lever to 2 before printing.

Note:

❏

It is best to load continuous paper with labels on the pull tractor. Do not

load labels on the rear or front push tractor.

❏

Never feed labels backward using the Load/Eject or Tear Off/Bin button.

When fed backward, labels can easily peel off the backing sheet and cause a

paper jam.

❏

Because labels are sensitive to temperature and humidity, use them only

under normal operating conditions:

Temperature

Humidity

❏

Do not leave labels loaded in the printer between jobs; they may curl

around the platen and jam when you resume printing.

Paper Handling

59 to 77°F (15 to 25°C)

30 to 60% RH