Accurian 16-454 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Портативний телевізор Accurian 16-454. Accurian 16-454 12 сторінок. 7” widescreen portable handheld tv

Друкувати сторінку
Accurian 16-454 Посібник користувача

Setting Up Channels

You must scan for available analog and digital channels when you set up your TV. If you
do not scan for channels, the Channel Up and Down buttons will not function.
To scan for channels:
1.
Turn on your TV and set the input to TV.
2.
Press MENU. The Menu screen appears.
3.
Press the
button twice to access the Channel Setup menu.
4.
Select AutoScan. The TV beings to scan for available channels. You can interrupt the
scan by pressing and holding MENU on the TV.
5.
When the scan is complete, you can adjust the antenna, select Auto Scan Add CH
to add more channels to those scanned.
6. Press MENU again to exit the setting menu.

Selecting Analog or Digital Channels

You can select specific analog or digital TV stations using your remote control.
To select an analog station, enter the channel number followed by "-0. " For example,
enter "11-0" for the analog channel 11. If available, the analog channel appears.
To select a digital station, enter the channel number followed by "-1. " For example, enter
"11-1" for the digital channel 11. If available, the digital channel appears.
Some digital stations provide multiple broadcasts on a single channel. To access these
directly, enter higher numbers after the channel number. For example, "11-2""11-3" etc.
for digital broadcasts of channel 11. If available, these digital channels appear.

Using External Antenna

If the picture is not clear with the built-in rod antenna, try placing your TV near a
window or connecting an external antenna to the TV to improve reception. If you
are in an area with weak TV signals or inside a concrete building, you might need an
external antenna to improve reception. The supplied external antenna (16 ft) provides
convenience and flexibility for receiving analog and digital signals.
Connect the external
antenna to the RF IN
jack on the TV.
Magnetic mount for
stable placement.
Note: The external antenna is not
intended to improve reception when
used within or outside a moving
vehicle.
If you are not using the supplied
external antenna, you might need to
use the L shaped F connector adapter
(supplied) to connect your antenna to
the RF IN jack.
9