DigiDesign Mbox Базовий посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Базовий посібник для Аксесуари DigiDesign Mbox. DigiDesign Mbox 20 сторінок. Version 6.7 for le systems on windows xp or mac os x
Друкувати сторінкуGetting Sound In and Out of your Mbox
To hear audio recorded into a Pro Tools session,
you will need to connect headphones or an ex-
ternal sound system (such as powered monitors
or a home stereo) to Mbox. Sound from Mbox
cannot be played through your computer's
speakers or your computer's sound output.
Connecting Headphones
There are two headphone jacks on the Mbox, a
1/8-inch mini plug jack on the front, and a 1/4-
inch jack on the back. You cannot use both
jacks at once.
Back
1/4-inch
Headphone
jack
Front 1/8-inch
Headphone jack
Headphone jacks on front and back of Mbox
To connect headphones:
• Connect headphones with a 1/8-inch stereo
mini connector (or an adapter) to the front
Headphone jack.
– or –
• Connect headphones with a 1/4-inch stereo
connector (or adapter) to the back Head-
phone jack.
The front panel Headphone control adjusts
the volume level of both the front and back
Headphone jacks.
2
Mbox Basics Guide
Connecting a Sound System
The outputs on the back of the Mbox support
1/4-inch plugs. These connections can be bal-
anced, TRS style connectors, or unbalanced. To
listen to your Pro Tools session, these outputs
can be connected to any amplification system:
powered speakers, home stereo system, or an au-
dio mixer.
When connecting to a stereo system, connect
the left channel (often the white plug) to Line
Output 1, and right channel (often the red plug)
to Line Output 2.
Home stereo systems often use RCA connec-
tors. You can use an adaptor or a special ca-
ble to convert from the TRS or TS connectors
used by Mbox to the RCA connectors on
your home stereo.
Line Output 2
(right output)
Stereo output from the Mbox
Line Outputs 1 and 2 play the audio that is
routed to analog outputs 1 and 2 within
Pro Tools.
Line Output 1
(left output)