DigiDesign 96 I/O Посібник - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник для Системи вводу/виводу DigiDesign 96 I/O. DigiDesign 96 I/O 19 сторінок. Version 8.0

appendix a

Card Removal and Replacement

In the event of a problem with the A/D or D/A

cards in your 96 I/O, you can remove the card

and send it to Digidesign for repair.

The modular nature of the Pro Tools|HD system

lets you return the specific card instead of the

entire 96 I/O. Your Pro Tools|HD system will

continue to function while missing a single

card. It will not function if more than one of the

factory-installed cards is removed.

Before handling any of the cards or internal

components of 96 I/O, discharge any static

electricity by touching the outer casing of

the power supply.

To remove an I/O card from the 96 I/O:

Power off and disconnect the 96 I/O from

your Pro Tools|HD system.

Make sure that the 96 I/O AC cord remains

plugged in so that it is grounded.

Remove all of the 16 small phillips-head

screws around the edges of the top cover. Keep

the screws (you will need them to re-attach the

top cover).

Removing the top cover screws

Lift off the top of the 96 I/O and set it aside.

Gently disconnect the 50-pin connector from

the edge of the card.

Appendix A: Card Removal and Replacement