Epson ActioPrinter 2250 Посібник - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник для Принтер Epson ActioPrinter 2250. Epson ActioPrinter 2250 13 сторінок. Epson printer specification sheet
![Epson ActioPrinter 2250 Посібник](/uploads/products/server2/466458/466458.png)
9.
Turn off the printer to exit the default-setting mode. Any
changes you have made remain in effect until you change them
again.
10. After you exit the default-setting mode, slide the narrow cover
back on the printer.
Default settings
This section describes all the features in the default-setting mode.
Character spacing
When you select 10 cpi, the printer prints 10 characters per inch
(cpi). When you select 12 cpi, it prints 12 characters per inch.
Shape of zero
The printer prints the zero character with a slash (8) when the
setting is on, or no slash (0) when the setting is off. The slashed zero
allows you to easily distinguish between an uppercase "O" and a
zero when printing such items as program lists.
Skip-over-perforation
When
this feature, the printer skips over the
you turn on
perforations of continuous paper, providing a l-inch margin
between the last line printed on one page and the first line printed
on the next. Because most software programs set their own top and
margins,
bottom
you should use this feature only if your program
does not provide them. This feature does not affect single-sheet
paper.
Tear-off position
When you use continuous paper with the push tractor, this feature
advances the paper perforation to the tear-off position where you
can easily tear off the printed page. When the printer receives data,
it automatically reverses the paper to the top-of-form position and
starts printing, so you can use all of the next sheet.
You can choose from two tear-off positions with the feature. If you
select On cutter, the printer feeds the paper perforation to the edge of
the printer cover. If you select Above cutter, the printer feeds the
perforation about 80 mm (3 inches) beyond the printer cover's edge.
Auto line feed
When
the auto line feed feature is on, each carriage return (CR) code
is accompanied by a line feed (LF) code. If your printed text is
unexpectedly double-spaced, set this feature to off. If text lines print
on top of each other, set it to on.
9-Pin Printers
feed
Back
When you set this feature to Disable, the printer never feeds
paper backward.
The printer does not feed paper to the paper-park position even
if you press the
LF/FF
The tear-off feature is disabled.
The printer does not feed paper back to the paper-park position
and then advance it to the top-of-form position between jobs
even if paper is loaded when you turn on the printer.
Set this feature to Disable when you use labels, or when you do not
want to tear off continuous paper after each print job.
Character table
Character tables contain the characters and symbols used in
different languages. Your printer includes a wide variety of
character tables. You can choose from these options:
Italic character table:
U.S.A.
l
l
U.K.
l
l
Italy
l
l
Graphic character table:
PC 437 (USA, standard Europe)
l
PC 860 (Portuguese)
l
PC 865 (Nordic)
l
Abicomp
l
(Brazilian Portuguese)
Page length
This option is available only when you use continuous paper
with the push tractor. You can set the page length to 8.5, 11,
12, or 70/6 (A4) inches.
TOF (top-of-form) position
Whenever you press the LF/FF button or send the form feed
command, the printer loads paper to the top-of-form (TOF) position.
The TOF position is factory set to the ±0 position (8.5 mm - 0.33
inch - from the top edge of paper). You can set this position from
7 / 1 4 / 9 2
ActionPrinter 2250
and
buttons.
FONT
France
Germany
l
Sweden
Denmark 1
l
Spain 1
PC 850 (Multilingual)
l
PC 863 (Candian French)
l
. BRASCII
(Brazilian Portuguese)
AP-2250-11