Epson AcuLaser C4200 Посібник із застрягання паперу - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник із застрягання паперу для Принтер Epson AcuLaser C4200. Epson AcuLaser C4200 4 сторінки. Epson aculaser c4200dn: install guide
Також для Epson AcuLaser C4200: Посібник з налаштування (16 сторінок)
Друкувати сторінкуJam C A
1
Remove the paper set in the MP
tray. If the paper is jammed in the
MP tray, gently pull out any sheets
of paper with both hands.
2
Note:
The illustration shows the standard
lower cassette. If the optional paper
cassette unit is installed, check the
unit's cassettes in the same way.
3
Note:
Confirm that the jammed paper is not
still deep inside the printer.
4
5
6
Warning:
w
Be careful not to touch the fuser,
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
7
8
Warning:
w
Be careful not to touch the fuser,
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Note:
Make sure to place the photoconductor
unit on the flat surface as shown below.
9
Warning:
w
Be careful not to touch the fuser,
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Caution:
c
Do not touch the rollers inside the
printer.
10
Warning:
w
Be careful not to touch the fuser,
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
Continue to the next page