Epson AcuLaser C8600 Посібник з налаштування - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з налаштування для Принтер Epson AcuLaser C8600. Epson AcuLaser C8600 44 сторінки. Epson aculaser c8600: specifications
Також для Epson AcuLaser C8600: Технічні характеристики (1 сторінок), Короткий довідник (23 сторінок)
Друкувати сторінку
Be sure not to scratch the surface of the photoconductor unit's
drum. When you remove the photoconductor unit from the
printer, always set the unit on a clean, smooth surface. Also,
avoid touching the drum, since oil from your skin can
permanently damage its surface and may affect print quality.
To get the best print quality, do not store the photoconductor
unit in an area subject to direct sunlight, dust, salty air, or
corrosive gases (such as ammonia). Avoid locations subject to
extreme or rapid changes in temperature or humidity.
Be sure to keep consumable components out of the reach of
children.
Do not leave jammed paper inside the printer. This can cause
the printer to overheat.
Important Safety Instructions
Read all of the following instructions before operating your
printer:
Follow all warnings and instructions marked on the printer.
Unplug the printer from the electrical outlet before cleaning.
Use a damp cloth for cleaning. Do not use liquid or aerosol
cleaners.
Do not use the printer near water.
Do not place the printer on an unstable surface.
Slots and openings, located on the front, back and top of the
printer, are provided for ventilation. Keep these slots and
openings clear to allow proper ventilation. Avoid placing the
printer on a soft surface, like a bed or a sofa, or in a small
enclosed area, as this restricts proper ventilation.
Safety Instructions
3