Epson AcuLaser C8600 Короткий довідник - Сторінка 11
Переглянути онлайн або завантажити pdf Короткий довідник для Принтер Epson AcuLaser C8600. Epson AcuLaser C8600 23 сторінки. Epson aculaser c8600: specifications
Також для Epson AcuLaser C8600: Посібник з налаштування (44 сторінок), Технічні характеристики (1 сторінок)
Друкувати сторінку
Writing ROM A/Writing ROM P
This message indicates an internal error in
the printer. Reset the printer. If this error
persists, consult your dealer.
Wrong Photoconductr
You have installed a photoconductor unit
that has not been designed for this printer.
Turn off the printer, remove the incorrect
photoconductor unit and install one
designed for this printer (S051082). See
"Replacing the photoconductor unit" in the
Reference Guide.
XXXX Toner Low
The indicated toner cartridges have less than
10% of toner remaining. (The letters C, M, Y,
or K appear in place of XXXX and indicate the
colors Cyan, Magenta, Yellow, and Black
respectively.)
You can continue to print until the XXXX
Toner Out error message appears. Waiting
until this message appears before replacing
the toner is recommended as toner may spill
during replacement if toner remains in the
cartridge. When printouts become faint,
see"Toner Cartridge" in the Reference Guide
for instructions.
To clear this error, select Clear Warning
from the control panel's Reset Menu. See
"How to access the control panel menus" for
instructions.
XXXX Toner Out
The indicated toner cartridges are out of
toner and need to be replaced. (The letters C,
M, Y, or K appear in place of XXXX and
indicate the colors Cyan, Magenta, Yellow,
and Black respectively.)
See "Toner Cartridge" in the Reference Guide
for instructions.
EPSON AcuLaser C8600 Quick Reference
Status and Error Messages (8/8)