Epson AcuLaser C9100 Посібник з налаштування - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з налаштування для Принтер Epson AcuLaser C9100. Epson AcuLaser C9100 33 сторінки. Color laser printer
Також для Epson AcuLaser C9100: Посібник із застрягання паперу (4 сторінок)
Друкувати сторінкуInternal laser radiation
Max. Average Radiation Power:
Wavelength:
This is a Class III b Laser Diode Assembly that has an invisible laser beam.
The printer head unit is NOT A SERVICE ITEM, therefore, the printer head
unit should not be opened under any circumstances. An additional laser
warning label is affixed to the inside of the printer.
CDRH regulations
For information about the Center for Devices and Radiological Health
of the U.S. Food and Drug Administration, see the Reference Guide.
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the printing
process. Ozone is produced only when the printer is printing.
Ozone exposure limit
The recommended exposure limit for ozone is 0.1 parts per million (ppm)
expressed as an average time-weighted concentration over an eight
(8) hour period.
The EPSON laser printer generates less than 0.1 ppm for eight (8) hours of
continuous printing.
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the following
conditions:
Use of multiple laser printers in a confined area
Operation in conditions of extremely low humidity
Poor room ventilation
Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat
generated are:
Not blown directly into the user's face
Vented directly out of the building whenever possible
vi
Safety Instructions
5 mW at laser aperture
785 nm