Arcflash Labs EMG-01 Beta Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Електроінструмент Arcflash Labs EMG-01 Beta. Arcflash Labs EMG-01 Beta 16 сторінок. 8 stage igbt coilgun
Друкувати сторінку
by the microcomputer. The microcontroller slowly increases the capacitor charging current
over the course of 6 seconds until the capacitors are at full charge and the power supply is
capable of delivering 1500W during full-auto fire.
When the switch is placed in the DISCHARGE (FORWARD) position, the battery is
disconnected from the main electronics and the capacitors are shorted across the DCL resistive
load, discharging them quickly.
2.5 Display/Firing Mode Selector
The display shows the velocity of the prior shot, the battery percentage and also shows
the current and available firing modes of the gun. There are four modes: SAFE, SINGLE, BURST,
and AUTO.
To adjust the firing mode, simply press inward on the firing mode selector until the
desired firing mode is selected.
In the SAFE mode, the gun will not fire and will display a warning should the user
depress the trigger.
In the SINGLE mode, the gun will fire a single shot semi-automatically once per trigger
pull.
In the BURST mode, the gun will fire three shots (at a rate of 8 rounds per second) in a
burst while the user holds down the trigger. If the user releases the trigger mid-burst,
subsequent shots will not fire.
In the AUTO mode, the gun will fire continuously as long as the user holds down the
trigger.
2.6 Battery
- The EMG-01B contains a large 6S Lithium Polymer battery. Never leave a charged
battery unattended and always store in a cool , dry environment.
- Take care not to pinch the wires when closing the battery compartment.
The EMG-01B contains a Lithium Polymer battery. As with any device containing a large
lithium battery, it presents a number of hazards including shock, fire, explosion or venting of
toxic gas. Always store the gun and battery in a cool, dry environment indoors, away from any
flammable materials.
8 |
P a g e