Arch hth easiflo 1 75876 Посібник оператора - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник оператора для Фільтр для басейну Arch hth easiflo 1 75876. Arch hth easiflo 1 75876 11 сторінок.
Друкувати сторінку
THE MAJOR
COMPONENTS -
HOW THEY WORK
General Principles of Operation
The three main components of the Easiflo
Chlorinator are (from top to bottom) the briquette
Hopper, the Dissolving Cup section and the
Discharge Tank. The water from the pool enters
the Easiflo
1 Chlorinator via the emergency
shutoff valve. The water then enters the base of
the Dissolving Cup where it splits to feed the
nozzles for generating the wave to penetrate into
the Briquette bed and the solids removal system.
The chlorinated solution is directed by a single
outlet spout to a channel that directs the solids
and chlorinated solution into the discharge tank
where it is discharged into the pool recirculation
system. The amount of chlorine discharged is
determined by the flow rate into the chlorinator. An
ORP controller can be used to regulate chlorinator
output by installing a solenoid on the inlet flow line.
An inlet water pressure of 2 to 20 psi (0.13 – 1.3 bar)
will provide sufficient flow into the Easiflo 1.
These pressures will result in an inlet flow rate of
0.75lt/min - 4 lt/min. The Easilfo 1 feed rate settings
referred to in the Easiflo System Owners manual are
calibrated for these flow rates.
Flow out of the Easiflo 1 feeder requires vacuum to
properly evacuate the discharge tank. A minimum
outlet flow-rate of 4 litres per minute ensures that
the outlet flow of the Easiflo 1 exceeds the flow in.
Once the Easiflo 1 has been installed the outlet
flow is measured by watching the level in the
Discharge Tank. If the water level is rising as the
feeder is running, the outlet flow out is insufficient.
Operational Requirements
Inlet pressure (Range)
2-20 psi
Ideal Inlet Pressure
12 psi
Outlet vacuum
3-29" Hg.
Operating Temperature
4 - 55ºC
Operational Characteristics
Inlet flow (gpm)
0.75lt – 4lt min Hopper Capacity
Outlet flow (Min)
0.92lt/min
1
SPECIFICATIONS – Model 75876
Dimensions:
Tubing
1/2" O.D.
Polyethylene
Chlorinator dimensions
W13"xD15""
Chlorinator height
31"
Chlorinator weight (full)
19kg
Chlorinator weight (empty) 7.7kg
12.7kg Easiflo
Briquettes
Feed Rate
Easiflo Briquettes
0.22 – 12.7kg of
Available Chlorine
per day
®
Briquette
Hopper
Dissolving
Cup
Emergency
Shut-off
Valve
Discharge
Tank
Outlet:
Discharge
Valve