Epson Artisan 730 Короткий посібник - Сторінка 19

Переглянути онлайн або завантажити pdf Короткий посібник для Принтер Epson Artisan 730. Epson Artisan 730 36 сторінок. Color inkjet printer
Також для Epson Artisan 730: Швидкі інструкції з налаштування (4 сторінок), Технічні характеристики (2 сторінок), Почніть звідси. (4 сторінок), Посібник з експлуатації (20 сторінок)

Epson Artisan 730 Короткий посібник

Cleaning the Print Head

If print quality has declined and the nozzle check indicates clogged nozzles, you can clean
the print head. Print head cleaning uses ink, so clean it only if necessary.
Note: You cannot clean the print head if an ink cartridge is expended, and may not be
able to clean it when a cartridge is low. You must replace the cartridge first (see
page 21).
1.
Load letter- or A4-size plain paper in the main paper cassette.
2.
Press
Home
3.
Press u or d to select
again.
4.
Press x
.
Start
Cleaning takes about 2 minutes. When it's finished, you see a message on the display
screen.
Caution: Never turn off the printer during head cleaning or you may damage it.
5.
Select
Nozzle Check
that the print head is clean.
6.
If there are still gaps or lines, or the test patterns are faint, run another cleaning cycle
and check the nozzles again.
Note: If you don't see any improvement after cleaning the print head four times, turn
off the printer and wait at least six hours to let any dried ink soften. Then try cleaning
the print head again. If quality does not improve, one of the ink cartridges may need to
be replaced. If that doesn't help, contact Epson as described on page 29.
If you do not use your product often, it is a good idea to print a few pages at least once
a month to maintain good print quality.
, if necessary, press l or r to select
Maintenance
, press
, then press x
OK
Setup
, press
, select
OK
Head Cleaning
to run a nozzle check and confirm
Start
, then press
OK
, then press
Maintaining Your Product
.
OK
19