Epson Artisan 730 Швидкі інструкції з налаштування - Сторінка 3
Переглянути онлайн або завантажити pdf Швидкі інструкції з налаштування для Принтер Epson Artisan 730. Epson Artisan 730 4 сторінки. Color inkjet printer
Також для Epson Artisan 730: Короткий посібник (36 сторінок), Технічні характеристики (2 сторінок), Почніть звідси. (4 сторінок), Посібник з експлуатації (20 сторінок)
6
Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see "Epson technical
support").
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
M ake sure the printer is NOT CONNECTED to your
computer.
Windows
: If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable. You can't install your
software that way.
2
Insert the product CD.
3
W indows: If you see the AutoPlay window, click Run
Setup.exe. If you see the User Account Control screen,
click Yes or Continue.
Mac OS
X: Double-click the
®
4
C lick Install (Windows) or Continue (Mac OS X) and
follow the instructions on your computer screen.
5
W hen you see the Select Your Connection screen, check
the "Connection options" section on this sheet for more
information. Then click Next (Windows) or Continue
(Mac OS X) and follow the instructions on your computer
screen.
Epson icon.
Connection options
Wireless connection
You must install the software on every computer from which
you want to print. For the first installation, we recommend
using a temporary USB connection to simplify wireless setup.
After the printer is connected to the network, you will be
prompted to remove the cable.
If you're using Mac OS X 10.6.x or 10.7, or you don't have
a USB cable, you will need to use the control panel on the
printer to select wireless settings. Follow the instructions on
your computer screen during software installation; they will
explain how to connect the printer wirelessly this way.
M ake sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set
up your network.
Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection
Make sure you have an Ethernet
included). You must install the software on every computer
from which you want to print.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. If it has uppercase (ABC) or lowercase (abc)
letters, make sure you enter them correctly.
Press
, , , or on the control panel to select a letter
or function button on the screen. Then press OK.
Use the function buttons to select uppercase (AB12),
lowercase (ab12), symbols, spaces, or to delete
characters (
).
When you're finished, select Done and press OK.
You see error messages on the printer's screen.
See your Quick Guide for troubleshooting information.
network cable (not
®
Function buttons