Epson Artisan 810 Series Посібник з встановлення мережі - Сторінка 30

Переглянути онлайн або завантажити pdf Посібник з встановлення мережі для Принтер Epson Artisan 810 Series. Epson Artisan 810 Series 37 сторінок. Color inkjet printer
Також для Epson Artisan 810 Series: Посібник "Почніть тут (8 сторінок), Технічні характеристики (2 сторінок), Питання (4 сторінок), Посібник з експлуатації (20 сторінок)

■

Make sure there aren't any access restrictions (such as MAC address filtering)

set on the wireless router or access point. If access restrictions are set, register

the printer's MAC address on the router or access point. Print a Network

Status Sheet (see page 33) to obtain the MAC address. Then see your router or

access point's documentation for instructions.

■

If your wireless router or access point doesn't broadcast its network name

(SSID), see "Connect Wirelessly Using Advanced Setup" on page 8 for

instructions on connecting to your wireless network. If your wireless router or

access point has wireless security enabled, you will also need to know what

kind of security it is using.

■

If the printer doesn't connect to your wireless network, the WEP key or WPA

passphrase may have been entered incorrectly. See "Wireless Network

Installation" on page 4 to select your network settings again.

■

The printer is compatible with 802.11b and 802.11g. If your router or access

point supports 802.11n (Wireless N), makes sure that it is set to compatibility

mode to allow 802.11b and 802.11g devices to connect to it.

■

If your network has a firewall and you did not allow access when you installed

the software, you will need to reinstall the software following the instructions

on page 22. You might need to contact your firewall provider for assistance.

EpsonNet Setup was unable to find my printer on the network

1. If you see a screen like this one, click

Troubleshooting

and do one of the following: